Флэш память S29GL512S11TFA02 панели приборов Mercedes-Benz A-Класс III (W176) 2012-2015

Цена: 1 500 руб.
Дополнительные услуги

Характеристики

Параметр Значение
Артикул 008787
Модель и марка Mercedes-Benz A-Класс III (W176) 2012-2015
Количество на складе уточняйте у менеджера
Количество просмотров 219

Описание

В нашем интернет магазине Вы можете купить флэш память SPANSION S29GL512N панели приборов Mercedes-Benz A-Класс III (W176) 2012-2015, а так же воспользоваться услугой по ремонтту приборной панели Mercedes-Benz A-Класс III (W176) 2012-2015

 
Distinctive Characteristics

Architectural Advantages

  • Single power supply operation
    — 3 volt read, erase, and program operations 
  • Enhanced VersatileI/O™ control
    — All input levels (address, control, and DQ input levels) and outputs are determined by voltage on VIO input. VIO range is 1.65 to VCC
  • Manufactured on 110 nm MirrorBit process technology
  • SecSi™ (Secured Silicon) Sector region
    — 128-word/256-byte sector for permanent, secure identification through an 8-word/16-byte random Electronic Serial Number, accessible through a command sequence
    — May be programmed and locked at the factory or by the customer 
  • Flexible sector architecture
    — S29GL512N: Five hundred twelve 64 Kword (128 Kbyte) sectors
    — S29GL256N: Two hundred fifty-six 64 Kword (128 Kbyte) sectors
    — S29GL128N: One hundred twenty-eight 64 Kword (128 Kbyte) sectors 
  • Compatibility with JEDEC standards
    — Provides pinout and software compatibility for singlepower supply flash, and superior inadvertent write protection 
  • 100,000 erase cycles per sector 
  • 20-year data retention

    Performance Characteristics 
  • High performance
    — 80 ns access time (S29GL128N, S29GL256N),
    90 ns access time (S29GL512N)
    — 8-word/16-byte page read buffer
    — 16-word/32-byte write buffer
    — 25 ns page read times
    — 16-word/32-byte write buffer reduces overall programming time for multiple-word updates 
  • Low power consumption (typical values at 3.0 V, 5 MHz)
    — 30 mA typical interpage active read current; 10 mA typical intrapage active read current
    — 50 mA typical erase/program current
    — 1 µA typical standby mode current
  • Package options
    —56-pin TSOP/RTSOP 56-pin TSOP/RTSOP — 64-ball Fortified BGA56-pin TSOP/RTSOP
    — 64-ball Fortified BGA

Software & Hardware Features „

  • Software features
    — Program Suspend & Resume: read other sectors before programming operation is completed
    — Erase Suspend & Resume: read/program other sectors before an erase operation is completed
    — Data# polling & toggle bits provide status
    — Unlock Bypass Program command reduces overall multiple-word or byte programming time
    — CFI (Common Flash Interface) compliant: allows host system to identify and accommodate multiple flash devices „
  • Hardware features
    — Advanced Sector Protection
    — WP#/ACC input accelerates programming time (when high voltage is applied) for greater throughput during system production. Protects first or last sector regardless of sector protection settings
    — Hardware reset input (RESET#) resets device
    — Ready/Busy# output (RY/BY#) detects program or erase cycle completion
 
 

Телефон для связи: +7 (966) 099-30-36
Наш адрес: Москва, ул. Алтуфьевское шоссе д. 31 стр. 1 (схема проездасхема проезда)

Яндекс.Метрика